2.3 KiB
Orchestrator
The orchestrator is the core of drydock and will manage the ordering of driver actions to implement the main Drydock actions. Each of these actions will be started by the external cLCP orchestrator with different parameters to control the scope of the action.
Orchestrator should persist the state of each task such that on failure the task can retried and only the steps needed will be executed.
Bullet points listed below are not exhaustive and will change as we move through testing
ValidateDesign
Load design data from the statemgmt persistent store and validate that the current state of design data represents a valid site design. No claim is made that the design data is compatible with the physical state of the site.
VerifySite
Verify site-wide resources are in a useful state
- Driver downstream resources are reachable (e.g. MaaS)
- OS images needed for bootstrapping are available
- Promenade or other next-step services are up and available
- Verify credentials are available
PrepareSite
Begin preparing site-wide resources for bootstrapping. This action will lock site design data for changes.
- Configure bootstrapper with site network configs
- Shuffle images so they are correctly configured for bootstrapping
VerifyNode
Verification of per-node configurations within the context of the current node status
- Status: Present
- Basic hardware verification as available via OOB driver
- BIOS firmware
- PCI layout
- Drives
- Hardware alarms
- IPMI connectivity
- Basic hardware verification as available via OOB driver
- Status: Prepared
- Full hardware manifest
- Possibly network connectivity
- Firmware versions
PrepareNode
Prepare a node for bootstrapping
- Configure network port for PXE
- Configure a node for PXE boot
- Power-cycle the node
- Setup commissioning configuration
- Hardware drivers
- Hardware configuration (e.g. RAID)
- Configure node networking
- Configure node storage
DeployNode
Begin bootstrapping the node and monitor success
- Initialize the Introspection service for the node
- Bootstrap the node (i.e. Write persistent OS install)
- Ensure network port is returned to production configuration
- Reboot node from local disk
- Monitor platform bootstrapping
DestroyNode
Destroy current node configuration and rebootstrap from scratch