airship
/
drydock
Code Issues Proposed changes
drydock/drydock_provisioner/drivers
History
Ahmad Mahmoudi 471bc6147e Added code to support Destroy Node 
Aded API capability to erase the storage and destroy one
or more nodes from any node state.
After this operation, the destroyed nodes are deleted from maas
database, and will need to be re-enlisted and be added to maas
in New state. if they need to be re-deployed.

Change-Id: I986278902965d93514f8198602f971669e1e2db3
 		2018-08-13 20:37:34 -05:00
..
node Added code to support Destroy Node 2018-08-13 20:37:34 -05:00
oob Update Formatting with YAPF 2018-06-08 13:24:26 +00:00
__init__.py Refactor orchestrator 2017-10-26 15:00:39 -05:00
driver.py Add Unit/Integration tests for Dryd-33 2018-01-03 10:52:52 -05:00
readme.md Zuul: Initial Airship-Drydock checks 2018-05-24 16:59:12 -05:00

readme.md

Drivers

Drivers are downstream actors that Drydock will use to actually execute orchestration actions. It is intended to be a pluggable architecture so that various downstream automation can be used. A driver must implement all actions even if the implementation is effectively a no-op.

oob

The oob drivers will interface with physical servers' out-of-band management system (e.g. Dell iDRAC, HP iLO, etc...). OOB management will be used for setting a system to use PXE boot and power cycling servers.

Actions

  • ConfigNodePxe - Where available, configure PXE boot options (e.g. PXE interface)
  • SetNodeBoot - Set boot source (PXE, hard disk) of a node
  • PowerOffNode - Power down a node
  • PowerOnNode - Power up a node
  • PowerCycleNode - Power cycle a node
  • InterrogateOob - Interrogate a node's OOB interface. Resultant data is dependent on what functionality is implemented for a particular OOB interface

node

The node drivers will interface with an external bootstrapping system for loading the base OS on a server and configuring hardware, network, and storage.

Actions

  • CreateNetworkTemplate - Configure site-wide network information in bootstrapper
  • CreateStorageTemplate - Configure site-wide storage information in bootstrapper
  • CreateBootMedia - Ensure all needed boot media is available to the bootstrapper including external repositories
  • PrepareHardwareConfig - Prepare the bootstrapper to handle all hardware configuration actions (firmware updates, RAID configuration, driver installation)
  • IdentifyNode - Correlate a node definition in the Drydock internal model with a node detected by the downstream node bootstrapper.
  • ConfigureHardware - Update and validate all hardware configurations on a node prior to deploying the OS on it
  • InterrogateNode - Interrogate the bootstrapper about node information. Depending on the current state of the node, this interrogation will produce different information.
  • ApplyNodeNetworking - Configure networking for a node
  • ApplyNodeStorage - Configure storage for a node
  • ApplyNodePlatform - Configure stream and kernel options for a node
  • DeployNode - Deploy the OS to a node
  • DestroyNode - Take steps to bring a node back to a blank undeployed state

network

The network drivers will interface with switches for managing port configuration to support the bootstrapping of physical nodes. This is not intended to be a network provisioner, but instead is a support driver for node bootstrapping where temporary changes to network configurations are required.

Actions

  • InterrogatePort - Request information about the current configuration of a network port
  • ConfigurePortProvisioning - Configure a network port in provisioning (PXE) mode
  • ConfigurePortProduction - Configure a network port in production (configuration post-deployment) mode