![]() - The spec calls it out capitalized strings - Remove pip cache from Dockerfile build Change-Id: I4c8907120ba0213936060d9f0b463fc5e0bcf7db |
||
---|---|---|
.. | ||
actions | ||
validations | ||
__init__.py | ||
orchestrator.py | ||
readme.md | ||
util.py |
readme.md
Orchestrator
The orchestrator is the core of drydock and will manage the ordering of driver actions to implement the main Drydock actions. Each of these actions will be started by the external cLCP orchestrator with different parameters to control the scope of the action.
Orchestrator should persist the state of each task such that on failure the task can retried and only the steps needed will be executed.
Drydock Tasks
Bullet points listed below are not exhaustive and will change as we move through testing
ValidateDesign
Load design data from the statemgmt persistent store and validate that the current state of design data represents a valid site design. No claim is made that the design data is compatible with the physical state of the site.
Validations
- Networking
- No static IP assignments are duplicated
- No static IP assignments are outside of the network they are targetted for
- All IP assignments are within declared ranges on the network
- No network is allowed on multiple network links
- Network MTU is equal or less than NetworkLink MTU
- MTU values are sane
- NetworkLink bond mode is compatible with other bond options
- NetworkLink with more than one allowed network supports trunking
- Storage
- Boot drive is above minimum size
- Root drive is above minimum size
- No physical device specifies a target VG and a partition list
- No partition specifies a target VG and a filesystem
- All defined VGs have at least one defined PV (partition or physical device)
- Partition and LV sizing is sane
- Percentages don't sum to above 100%
- If percentages sum to 100%, no other partitions or LVs are defined
- Node
- Root filesystem is defined on a partition or LV
- Networks assigned to each node's interface are within the set of of the attached link's allowed_networks
- Inter
VerifySite
Verify site-wide resources are in a useful state
- Driver downstream resources are reachable (e.g. MaaS)
- OS images needed for bootstrapping are available
- Promenade or other next-step services are up and available
- Verify credentials are available
PrepareSite
Begin preparing site-wide resources for bootstrapping. This action will lock site design data for changes.
- Configure bootstrapper with site network configs
- Shuffle images so they are correctly configured for bootstrapping
VerifyNode
Verification of per-node configurations within the context of the current node status
- Status: Present
- Basic hardware verification as available via OOB driver
- BIOS firmware
- PCI layout
- Drives
- Hardware alarms
- IPMI connectivity
- Basic hardware verification as available via OOB driver
- Status: Prepared
- Full hardware manifest
- Possibly network connectivity
- Firmware versions
PrepareNode
Prepare a node for bootstrapping
- Configure network port for PXE
- Configure a node for PXE boot
- Power-cycle the node
- Setup commissioning configuration
- Hardware drivers
- Hardware configuration (e.g. RAID)
- Configure node networking
- Configure node storage
- Interrogate node
- lshw output
- lldp output
DeployNode
Begin bootstrapping the node and monitor success
- Initialize the Introspection service for the node
- Bootstrap the node (i.e. Write persistent OS install)
- Ensure network port is returned to production configuration
- Reboot node from local disk
- Monitor platform bootstrapping
DestroyNode
Destroy current node configuration and rebootstrap from scratch
Integration with Drivers
Based on the requested task and the current known state of a node the orchestrator will call the enabled downstream drivers with one or more tasks. Each call will provide the driver with the desired state (the applied model) and current known state (the build model).